Blacksmithing

From MeritBadgeDotOrg

Blacksmithing merit badge
	Status:	Discontinued	BSA Advancement ID:	unavailable
	Created:	191	Original/new/replaced:
	Discontinued:	1952	Replaced by:

[[Category:Discontinued {{{group}}} merit badges]]

Blacksmithing is a discontinued merit badge. It was one of the original merit badges in 1911 amd discontinued in 1952.

Merit badge requirements

1. Make an open link of 3/4-inch stock.

2. Forge a chain hook out of 3/4 x 1/2-inch soft steel or 3/4-inch round iron.

3. Make a bolt of 1/2-inch iron.

4. Bend and weld three links and form them into a chain, these links to be fastened to the hook of Requirement 2 by a ring, and links and ring to be made out of 3/8-inch iron.

5. Make a straight lap weld of 1/4 x 1-inch stock.

6. Make a rock drill.

7. Temper a rock drill.

8. Explain how to harden and temper a cold chisel.

The official source for the information shown in this article or section is: Handbook for Boys, 1948 Edition

Notes

External links