Carpentry

From MeritBadgeDotOrg

Revision as of 20:10, January 2, 2011 by Akk32 (Talk | contribs)
Jump to: navigation, search
Carpentry merit badge
Status: Discontinued BSA Advancement ID:
Created: 1911, 2010 Original/new/replaced:
Discontinued: 1952, 2010 Replaced by:

Contents

[[Category:Discontinued {{{group}}} merit badges]]

The Carpentry merit badge was one of the original 57 merit badges issued by the Boy Scouts of America in 1911.



Carpentry requirements

  1. Demonstrate the use of the rule, square, level, plumb-line, mitre, chalk-line and bevel.
  2. Demonstrate the proper way to drive, set, and clinch a nail, draw a spike with a claw-hammer, and to join two pieces of wood with screws.
  3. Show correct use of the cross-cut saw and of the rip-saw.
  4. Show how to plane the edge, end and the broad surface of a board.
  5. Demonstrate how to lay shingles.
  6. Make a simple article of furniture for practical use in the home or on the home grounds, finished in a workmanlike manner, all work to be done without assistance.



The text of these requirements is locked and can only be edited
by an administrator.
Please note any errors found in the above requirements on this article's Talk Page.



Requirement resources

6. Knock-Off Wood Free, easy-to-understand graphic and text plans, categorized by cost and difficulty level.

BSA Merit Badge Resources

  • Woodwork Merit Badge has many project ideas as well:


Related awards

2010 Historic merit badge program resources

Merit Badge MeritBadge.Org USScouts.Org Scouting.Org (BSA)
Carpentry Workbook Adobe Acrobat PDF Workbook Microsoft Word DOC document MB web page "2010" MB packet "Historical" MB pamphlet
Pathfinding Workbook Adobe Acrobat PDF Workbook Microsoft Word DOC document MB web page "2010" MB packet "Historical" MB pamphlet
Signaling Workbook Adobe Acrobat PDF Workbook Microsoft Word DOC document MB web page "2010" MB packet "Historical" MB pamphlet
Tracking Workbook Adobe Acrobat PDF Workbook Microsoft Word DOC document MB web page "2010" MB packet "Historical" MB pamphlet

The basics of the 2010 Historic Merit Badge Program include:

  • "The effective date for earning these new merit badges is April 1, 2010, and requirements must be completed no later than Dec. 31, 2010." — 2010 Historical MB Program
  • "The contemporary merit badges closely resemble the original designs of their counterparts with the exception of the border, which is gold." — 2010 Historical MB Program
  • The BSA Supply Division will not print (new) or re-print (old) pamphlets for these merit badges – official BSA materials for these merit badges will be available only in electronic format at Scouting.Org. (We have provided you those links, above).


History: 1938, 1945, 1950 merit badge requirements

Historical Carpentry merit badge.
Historical Carpentry merit badge.
  1. Demonstrate the use of the rule, square, level, plumb-line, mitre, chalk-line and bevel.
  2. Demonstrate the proper way to drive, set, and clinch a nail, draw a spike with a claw-hammer, and to join two pieces of wood with screws.
  3. Show correct use of the cross-cut saw and of the rip-saw.
  4. Show how to plane the edge, end and the broad surface of a board.
  5. Demonstrate how to lay shingles.
  6. Make a simple article of furniture for practical use in the home or on the home grounds, finished in a workmanlike manner, all work to be done without assistance.

See also

Boy Scout portal
Varsity Scout portal
Venturing portal
General Merit Badge information


External links


Personal tools
language