Carpentry (Centennial merit badge)

From MeritBadgeDotOrg

Revision as of 10:46, October 20, 2012 by Scouterdennis (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Carpentry (Centennial merit badge) merit badge has been discontinued. (See discontinued merit badges.)


Carpentry "Centennial" merit badge
Status: Discontinued
Released: 2010 BSA Advancement ID: 139
Retired: 2010 Requirements Revision: 2010

Contents


The Carpentry merit badge was one of the original 57 merit badges issued by the Boy Scouts of America in 1911; it was discontinued in 1952. It was re-released, for 2010 only, for the Boy Scouts of America's "Centennial" celebration.


Carpentry (Centennial merit badge) requirements for 2010 only

  1. Demonstrate the use of the rule, square, level, plumb-line, mitre, chalk-line and bevel.
  2. Demonstrate the proper way to drive, set, and clinch a nail, draw a spike with a claw-hammer, and to join two pieces of wood with screws.
  3. Show correct use of the cross-cut saw and of the rip-saw.
  4. Show how to plane the edge, end and the broad surface of a board.
  5. Demonstrate how to lay shingles.
  6. Make a simple article of furniture for practical use in the home or on the home grounds, finished in a workmanlike manner, all work to be done without assistance.



The official source for the information shown in this article or section is:
BSA's Historical Merit Badge Program, 2010 Edition (BSA Supply No. N/A)

The text of these requirements is locked and can only be edited
by an administrator.
Please note any errors found in the above requirements on this article's Talk Page.


Notes


Related awards


External links


Personal tools
language